On Sport model

Your vehicle comes with the two ignition keys.
All models except Sport

You should have received a key number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Honda-approved key blanks.
These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged.
• Protect the keys from direct sunlight, high temperature, and high humidity.
• Do not drop the keys or set heavy objects on them.
• Keep the keys away from liquids.
If they get wet, dry them immediately with a soft cloth.
All models except Sport
The keys do not contain batteries.
Do not try to take them apart.
Clutch Clearance Inspection (A/T)
Special Tools Required
Clutch Compressor Attachment 07ZAE-PRP0100
Inspect the clutch piston, the discs, the plates, and the end-plate for
wear and damage, and inspect the clutch wav ...
Pilot Bearing Inspection
Inspect the crankshaft pilot bearing for wear and damage.
Inspect the inside surface of the crankshaft pilot bearing with your
finger. If the crankshaft pilot bearing is not smoot ...
Countershaft Reassembly (M/T)
Exploded View
Special Tools Required
Driver Handle, 40 mm I.D. 07746-0030100
Bearing Driver Attachment, 25 mm I.D. 07746-0030200
Bearing Driver Attachment, 30 mm I.D. 07746-0030300
Bear ...