Honda Fit: Control Locations

See also:

Installation (Part -3)
Remove the vinyl tape from the connectors. Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox. ...

Park Pin Switch Replacement (A/T)
NOTE: The park pin switch is installed in the shift lever bracket base, and not available separately from the shift lever bracket base; replace the park pin switch and the shift lever bracket base ...

Pilot Bearing Replacement
Remove the crankshaft pilot bearing (A) using the remover weight (B), and the 15 mm bearing remover shaft set (C). Install a new pilot bearing (A) into the crankshaft using th ...