Honda Fit manuals

Honda Fit: A FewWordsAbout Safety

Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility.

To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.

Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle. You must use your own good judgement.

You will find this important safety information in a variety of forms, including:

Safety Labels -

on the vehicle. •  Safety Messages -

preceded by a safety alert symbol DANGER,WARNING , or CAUTION. and one of  three signal words:
DANGER

,WARNING

, or CAUTION

.

These signal words mean:

if you don’t follow instructions.You WILL be KILLED or SERIOUSLY HURT
if you don’t follow instructions.

if you don’t follow instructions.You CAN be KILLED or SERIOUSLY HURT
if you don’t follow instructions.

instructions.You CAN be HURT if you don’t follow
instructions.

• Safety Headings -s

uch as Important Safety Reminders or Important Safety Precautions.
• Safety Section -

such as Driver and Passenger Safety. • Instructions -

how to use this vehicle correctly and safely.

This entire book is filled with important safety information please read it carefully.

See also:

Precautions for Opening/Closing the Tailgate
Always make sure individuals and objects are clear of the tailgate before opening or closing it. ■ Opening the tailgate • Open the tailgate all the way. ►If it is not fully opened, ...

Immobilizer System
The immobilizer system protects your vehicle from theft. If an improperly-coded key (or other device) is used, the engine’s fuel system is disabled. When you turn the ignition switch to the ON (I ...

Transmission Side - Release Bearing Installation
Apply high temp urea grease (P/N 08798-9002) to the release fork (A), the release fork bolt (B), the release bearing (C), and the release bearing guide (D) in the shaded areas, then set th ...

© 2026 Copyright www.hfitinfo.com