Wheel Runout Inspection
Raise and support the vehicle.
Check for a bent or deformed wheel.
Set up the dial gauge as shown, and measure the axial runout by turning
the wheel.
...
Rocker Arm Assembly Removal
Remove the cylinder head cover.
Loosen the rocker arm adjusting screws (A).
Unscrew the rocker shaft mounting bolts two turns at a time in the
sequence shown.
...
Valve Body and ATF Strainer Removal (A/T)
Remove the ATF feed pipe (A) from the regulator valve body (B).
Remove the ATF feed pipes (C) (D) from the servo body (E).
Remove the ATF strainer (F) (two bolts).
...