Honda Fit: Visiting Your Dealer
If you have a question that you cannot resolve using the available help resources, you can consult your dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service technician can refer the issue to the factory so that a solution can be found. Be patient, the service technician may be unfamiliar with your specific issue.
See also:
Service Station Procedures
Refueling
1. Park with the driver’s side closest to the service station pump.
2. Outside of the vehicle, open the fuel fill door by pulling its notched edge.
3. Remove the fuel fill cap slowly. ...
Alternator Disassembly (Page -3)
Install a new front bearing in the drive-end housing with a hammer, the driver
handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B).
@fo ...
Pressure Plate Inspection and Removal
Remove the transmission.
Check the evenness of the height of the diaphragm spring fingers using
the clutch alignment disc (A), clutch alignment shaft (B), remover handle
(C ...
Categories
