Honda Fit manuals

Honda Fit: Receiving a Call

1. Press the  (Pick-Up) button


1. Press the to (Pick-Up) button
to answer a call and display the Calling screen.

2. Press the  (Hang-Up) button


2. Press the to (Hang-Up) button
to terminate the call.

The following options are available during a call:

MUTE

: Allows you to mute your voice.

Touch

Tones (available on some phones):

Allows you to send numbers or names during a call. This is useful when you call an automated phone system.

• Transfer Call

: Allows you to transfer a call from HFL to your phone, or from your phone to HFL.

An incoming call notification appears on the navigation screen, and you hear an audible ring tone.

If your phone has Call Waiting, press the button to put the original call on hold and
button to put the original call on hold and answer the incoming call. To return to the original call, press the again. If you button
again. If you want to hang up the original call and answer the new call, press the button.


To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

Some phones may send battery, signal strength, and roaming status information to the screen.

Phonebook

Displays the cell phone’s imported phonebook.

See also:

Starting the Engine
1. Make sure the parking brake is applied. Automatic transmission models 2. Check that the shift lever is in , then depress the brake pedal. ► Although it is possible to start the vehic ...

Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is excessive play or noise, replace the release bearing. NOTE: The release bearing is packed with grease. Do not ...

MAF Sensor/IAT Sensor Replacement
Disconnect the MAF sensor/IAT sensor connector (A). Remove the screws (B). Remove the MAF sensor/IAT sensor (C). Install the parts in the reverse order of removal ...

© 2026 Copyright www.hfitinfo.com