PHONE button
► Phone Setup
Set HFL options and features.
1. Select an item.
2. Select OK.
The following items are available:
• Bluetooth Setup
: Pairs your phone to the system.
• Bluetooth Connection:
Turns the Bluetooth® connection on or off.
On
: Connects your Bluetooth-compatible device to the system.
Off
(factory default): Disables the feature.
• Auto
Transfer
: Sets whether to automatically transfer a call from your phone to HFL when you enter and turn on the vehicle.
On
(factory default): Automatically transfers your call to HFL.
Off
: Disables the feature.
• Auto
Answer
: Sets whether to automatically answer an incoming call.
On
: Automatically connects an incoming call after about five seconds.
Off
(factory default): Disables the feature.
• Volume
: Select or
to adjust the receiver and ring
volume. If you change
the volume during a call, it is maintained at that level until you change it
again.
You can control the HFL system using voice commands.
Ignition Switch
The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and
START (III).
LOCK (0) - You can insert or remove the key only in this position.
To turn the key, push it in slightly ...
Interior Lights
Interior Light Switch
■ ON
The interior light comes on regardless of
whether the doors are open or closed.
■ Door activated
The interior light comes on in the following
situation ...
A/C System Inspection (With A/C)
NOTE: For A/C system noise,
go to the A/C System Noise Check.
Before troubleshooting any problem with the air conditioning system, other than
noise, do the following:
Check that the HVAC ai ...