1. Press the CD/AUX button.
2. Insert a disc into the disc slot.
► The disc automatically begins playing.
3. Select AUDIO/STREET until AUDIO is highlighted in blue.
► The audio information is displayed at the bottom of the screen.
4. Select or
to select a track.
► You can also select a track using
the SEEK/SKIP button.
► The track number and elapsed time are displayed on the display. Text information stored on M/WMA/AAC discs is also displayed.
“Display audio screen”
You can control the disc using voice commands.
A visual guide helps you operate the audio system.
In some cases, the name of the artist, album, or track may not appear correctly.
Do not use discs with adhesive labels. The label can cause the disc to jam in the unit.
WMA tracks protected by digital rights management (DRM) cannot be played. The audio system displays Unplayable File, then skips to the next track.
If there is a problem, you may see an error message on the display.
If you eject the disc but do not remove it from the slot, the system reloads the disc automatically after several seconds.
If the EPS System Indicator Comes On
■ Reasons for the indicator to come on
• Comes on when there is a problem with EPS system.
• If you depress the accelerator pedal repeatedly to increase the engine
speed while the engin ...
Steering Angle Sensor Replacement
SRS components are located in this area. Review the
SRS component locations and the
precautions and procedures.
NOTE: Do not damage or drop the combination switch as the steering angle ...
Drive Belt Inspection
Inspect the belt for cracks or damage. If the belt is cracked or damaged,
replace it.
Check that the position of the auto-tensioner indicator (A) is within the
standard range ( ...