“Display audio screen”
You can control the radio using voice
commands.
A visual guide helps you operate the audio system.
The ST indicator comes on the display for stereo FM broadcasts. Stereo reproduction in AM is not available.
The radio can receive the complete AM and FM bands:
AM band: 530 to 1710 kHz FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations in the preset buttons. FM1 and FM2 let you store six stations each.
As required by the FCC
1)This device complies with Part 15 of the
FCC Rules and Canadian RSS-210/RSSGen.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2 ...
Servo Body Disassembly, Inspection, and Reassembly (A/T)
Clean all parts thoroughly in solvent, and dry them with compressed air.
Blow out all passages.
Inspect the servo body for scoring and damage.
Check all valves for fre ...
Warm Up TWC Removal/Installation
NOTE: If the warm up TWC is damaged internally, inspect the under-floor TWC
for debris.
Raise the vehicle on a lift.
Remove the bolts (A).
Lower the vehicle.
...