Honda Fit manuals

Honda Fit: Airbag Care

You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations: ■ When the airbags have deployed

If an airbag has inflated, the control unit and other related parts must be replaced.

Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.

When the vehicle has been in a moderate-to-severe collision

Even if the airbags did not inflate, have your dealer inspect the following: the driver’s seat position sensor, weight sensors in the passenger’s seat, front seat belt tensioners, and each seat belt that was worn during the crash.

■ Do not remove or modify a front seat without consulting a dealer

This would likely disable the driver’s seat position sensor or the passenger’s weight sensors. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact a Honda dealer, or for U.S. vehicles, American Honda Automobile Customer Service at 800-999-1009 and for Canadian vehicles, Honda Canada Customer Relations at 888-9-HONDA-9.

We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.

See also:

Lower Front Bumper Grille Replacement
Special Tools Required KTC Trim Tool Set SOJATP2014 *Available through the Honda Tool and Equipment Program; call 888-424-6857 With Front Fog Lights NOTE: Take care not to scratch ...

VIN, Engine, (Motor), Transmission Numbers, and Paint Codes
Vehicle Identification Number   a. Manufacturer, Make, and Type of Vehicle JHM: Honda Motor Co., Ltd. Honda passe ...

Selecting Bluetooth® Audio Mode
1. Make sure that your phone is on, paired, and linked to HFL. 2. Press the CD/AUX button until you get to Bluetooth® Audio mode. ►  A Bluetooth® message and icon are displayed on ...

© 2022 Copyright www.hfitinfo.com