Honda Fit: Setting the Clock Type
INFO button
► Setup ►Other
►Clock Adjustment►Clock Type
Set the design of the clock screen.
1. Select Clock Type or Background.
2. Select an option to change the design.
3. Select OK.
See also:
Intermediate Shaft Reassembly (A/T)
Exploded View
Special Tools Required
Oil Seal Driver, 65 mm 07JAD-PL90100
Bearing Driver Attachment, 52 x 55 mm 07746-0010400
Bearing Driver Attachment, 35 mm I.D. 07746-0030400
Driver ...
Removal (Part -1)
Do the battery terminal disconnection procedure.
Raise and support the vehicle.
Remove the front wheels.
Tilt the steering column all the way up and mov ...
Driveshaft Installatio
NOTE: Before starting installation, make sure the mating surfaces of the
joint and the splined section are clean.
Apply about 5 g (0.18 oz) moly 60 paste (P/N 08734-0001) to the contact
ar ...
Categories
