Honda Fit: Edit Waypoint Search Area
INFO button
► Setup ►Other
►Routing & Guidance►Edit Waypoint
Search Area “Edit”
Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.
You can specify a different search distance for freeways and surface streets.
1. Select a search distance.
2. Select OK.
The following options are available:
• On Freeways: 1, 2, 5, or 10 miles can be set. Factory default is 2 miles.
• On Surface Street: 1/2, 1, 2, or 5 miles can be set. Factory default is 1/2 mile.
The search distance does not affect the search
range used for the Find Nearest voice commands
(e.g., say 
“Find nearest gas
station”).
See also:
How to Set Readiness Codes
Malfunction Indicator Lamp (MIL) Indication (In relation to Readiness
Codes)
The vehicle has certain readiness codes that are part of the on-board
diagnostics for the emissions systems. If the ve ...
Tailgate Lock Cylinder Replacement
For Some Models
NOTE: Put on gloves to protect your hands.
Remove the tailgate lower trim panal.
Disconnect the tailgate cylinder rod (A).
NOTE: Check for damaged or stress-wh ...
Engine Oil Filter Feed Pipe Replacement
Remove the filter.
Remove the oil filter feed pipe.
Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and
hold one nut with a wrench, then ti ...
Categories
