Honda Fit: Start-up
The navigation system starts automatically when you turn the ignition to ACCESSORY (I) or ON (II). At start-up, the following Confirmation screen is displayed.
1. Select Change Language.
► If you do not need to change the system language, proceed to step 3.
2. Select the system language.
3. Select OK.
► Your current position is displayed on the map screen.
If the navigation system loses power at any time, you may need to press and hold the VOL 9 (Volume/Power) button for more than two seconds, or you may be prompted for the 5-digit security code.
You can change the system language at any time.
“OK” on the Confirmation screen cannot be selected by using a voice command. If you do not select OK within 30 seconds, the screen turns dark and you cannot use voice commands. Press any navigation or voice control button to continue.
Limitations for Manual Operation
Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayedout option until the vehicle is stopped.
Voice commands are still operable while the vehicle is in motion.
See also:
Tire Pressure Monitoring System (TPMS)
U.S. models only
Your vehicle is equipped with a tire pressure monitoring system (TPMS) that
turns on every time you start the engine and monitors the pressure in your tires
while driving.
Each ...
Accessories
When installing accessories, check the following:
• Do not install accessories on the windshield. They can obstruct your view and
delay your reaction to driving conditions.
• Do not install acc ...
Playing an iPod®
Connect the iPod® using your dock connector to the USB adapter cable, then
press
the AUX button.
■How to Select a File from the iPod® Menu
1. Press to display the iPod®
menu.
2. ...
Categories
