Honda Fit: System Setup

See also:

Inspection
Install the flange nut on the damper shaft end, and set the socket wrench and T-handle on the nut. Compress the damper assembly by hand, and check for smooth operation through ...

Camshaft Inspection
Remove the camshaft sprocket. Remove the rocker arm assembly, then disassemble the rocker arm. Put the rocker shaft holder bridge on the cylinder head, then tight ...

Piston Installation
If the Crankshaft is Already Installed Set the crankshaft to bottom dead center (BDC) for each cylinder as its piston is installed. Remove the connecting rod caps, and check that ...