Honda Fit: Overview—Functions at a Glance

See also:

Reverse Shift Fork Clearance Inspection (M/T)
Measure the clearance between the reverse idler gear (A) and the reverse shift fork (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2. ...

Tire Labeling
The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. Tire Size Whenever tires are replaced, they should be replaced with tires of the ...

Inboard Joint Side
Remove the boot bands. Be careful not to damage the boot. If the boot band is welded type (A), cut the boot band. If the boot band is a double loop type (B), lift up the ban ...