Honda Fit: Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK
. Turn
headlights and all accessories off.
2. Check the fuses in the engine compartment.
► If the fuse is blown, have it replaced by a dealer.
3. Inspect the small fuses in the engine compartment and the vehicle interior.
► If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.
NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Replace fuse with a spare fuse of the same specified amperage.
There is a fuse puller on the back of the engine compartment fuse box cover.
See also:
Power Door Mirrors
You can adjust the door mirrors when the
ignition switch is in ON .
■ Mirror position adjustment
L/R selector switch: Select the left or right
mirror. After adjusting the mirror, return th ...
Protecting Your Discs
General Information
• When using CD-R or CD-RW discs, use only high quality discs labeled for audio
use.
• When recording a CD-R or CD-RW, the recording must be closed for it to be used
by t ...
Troubleshooting
Why does the vehicle position icon on the map “lag” a
short distance behind my actual position, especially at
intersections?
This is normal. The navigation system is unaware of the
width o ...
Categories
