Honda Fit manuals

Honda Fit: If the Low Oil Pressure Indicator Comes On

■ Reasons for the indicator to come on


■ Reasons for the indicator to come on

Comes on when the engine oil pressure is low.

■ What to do as soon as the indicator comes on

1. Immediately park the vehicle in a safe place.

2. If necessary, turn the hazard warning lights on.

■ What to do after parking the vehicle

1. Stop the engine and let it sit for about one minute.

2. Open the hood and check the oil level.

► Add oil as necessary.

3. Start the engine and check the low oil pressure indicator.

► The light goes out: Start driving again.

► The light does not go out within 10 seconds: Stop the engine and contact a dealer for repairs immediately.

NOTICE

Running the engine with low oil pressure can cause serious mechanical damage almost immediately.

See also:

Transmission Side - Release Bearing Inspection
Check the play of the release bearing by spinning it by hand. If there is excessive play or noise, replace the release bearing. NOTE: The release bearing is packed with grease. Do not ...

Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque its locknut to 110 N·m (11.2 kgf·m,   81 lbf·ft). Remove any grease or any oil from the ...

Edit Avoid Area
INFO button ► Setup ►Other ►Routing & Guidance►Edit Avoid Area “Edit” Specify up to five areas to avoid (e.g., road construction, closures), if possible, when t ...

© 2026 Copyright www.hfitinfo.com