Stator Test
Check that there is continuity between each lead (A):
If there is continuity, go to step
24.
If there is no continuity, replace the stator.
...
Installation (Part -3)
Remove the vinyl tape from the connectors.
Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox.
...
Starting the Engine
1. Make sure the parking brake is applied.
Automatic transmission models
2. Check that the shift lever is in
, then
depress the brake pedal.
► Although it is possible to start the vehic ...