Honda Fit: Handling the Unexpected

See also:

Wheel Runout Inspection
Raise and support the vehicle. Check for a bent or deformed wheel. Set up the dial gauge as shown, and measure the axial runout by turning the wheel. ...

Installation
Hold the gearbox housing using a C-clamp (A) and wooden blocks (B) to a workbench as shown. Do not clamp the cylinder part of the gearbox housing in a vise. ...

Door Position Adjustment
NOTE: Check for a flush fit with the body, then check for equal gaps between the front, rear, and bottom door edges and the body. Check that the door and body edges are parallel. Place the ...