
Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion.
If your vehicle’s battery is disconnected or goes dead: • The audio system* is disabled.
• The clock resets.
• The navigation system* is disabled.
Clutch Wave-Plate Phase Difference Inspection (A/T)
Place the clutch wave-plate (A) on a surface plate, and set a dial
indicator (B) on the wave-plate.
Find the bottom (C) of a phase difference of the wave-plate, zero the
di ...
Hands Free Link Control Unit Input Test/Replacement
With navigation
Remove the driver's dashboard undercover.
Disconnect the 32P connector (A) from the HandsFreeLink control unit (B).
Inspect the connector and so ...
EPS Control Unit Removal/Installation
Do the battery terminal disconnection procedure.
Remove the under-dash fuse/relay box.
Disconnect EPS control unit connector A (11P) and connector B (16P) by
pus ...