Countershaft Inspection (M/T)
Inspect the gear and bearing contact areas for wear and damage, then
measure the countershaft at points A, B, and C. If any part of the
countershaft is less than the service limit, replace ...
Cylinder Head Inspection for Warpage
Remove the cylinder head.
Inspect the camshaft.
Check the cylinder head for warpage. Measure along the edges, and three
ways across the center:
If wa ...
Shift Lever Does Not Move
Automatic transmission models
Follow the procedure below if you cannot move the shift lever out of the
position.
■Releasing the Lock
1. Set the parking brake.
2. Remove the key from the ...