Honda Fit manuals

Honda Fit: Changing the Rear Wiper Blade Rubber

1. Raise the wiper arm off.


1. Raise the wiper arm off.

2. Pivot up the bottom end of the wiper blade


2. Pivot up the bottom end of the wiper blade until it comes off from the wiper arm.

3. Slide the wiper blade out from the end with


3. Slide the wiper blade out from the end with the indent.

NOTICE

Avoid dropping the wiper blade; it may damage the rear window.

4. Remove the retainers from the rubber blade


4. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade.

5. Slide the wiper blade onto the holder.


5. Slide the wiper blade onto the holder.

► Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.

See also:

Instrument Panel
* : If equipped ...

Center Vent
NOTE: Take care not to scratch the dashboard or its related parts. Remove these items: Audio unit, without navigation system ('9-11 models) Audio unit, with ...

Fuel Economy
Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possi ...

© 2024 Copyright www.hfitinfo.com