Honda Fit: High-Mount Brake Light Bulb

See also:

Rocker Arm Assembly Removal
Remove the cylinder head cover. Loosen the rocker arm adjusting screws (A). Unscrew the rocker shaft mounting bolts two turns at a time in the sequence shown. ...

Installation (Part -3)
Remove the vinyl tape from the connectors. Connect the EPS motor angle sensor 8P connector (A), torque sensor 6P connector (B) to the steering gearbox. ...

Wiper Blades
Check the condition of the wiper blades at least every six months. Replace them if you find signs of cracking in the rubber, areas that are getting hard, or if they leave streaks and unwiped areas ...