Change the shift position in accordance with your driving needs.
■ Shift lever positions
You cannot turn the ignition switch to LOCK
and
remove the key unless the shift lever is in
.
The vehicle may move forward very slightly even in
while the engine is cold.
Depress the brake pedal firmly and, when necessary, apply the parking brake.
■Shift Lever Operation
NOTICE
When you change the shift lever from
to
and
vice versa, come to a complete stop and keep the
brake pedal depressed.
Operating the shift lever before the vehicle has come to a complete standstill can damage the transmission.
Use the shift lever position indicator to check the lever position before pulling away.
Whichever position the shift lever is in when driving,
a blinking indicator indicates a
transmission
problem.
Avoid sudden acceleration and have the transmission checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine speeds in or over the tachometer red zone (engine speed limit). If this happens, you may experience a slight jolt.
It may not be possible to operate the shift lever if the brake pedal is applied while the shift lever release button is held down.
Depress the brake pedal first.
Evaporator Expansion Valve Replacement (With A/C)
Recover the refrigerant with a recovery/recycling/charging
station.
Remove the bolt from the A/C line clamp (A).
@font-face{font-family:
"H ...
Mirrors
Keep the inside and outside mirrors clean and adjusted for best visibility.
Be sure to adjust the mirrors before you start driving.
The inside mirror has day and night positions. The night positio ...
Torque Converter Housing Mainshaft Bearing and Oil Seal Replacement (A/T)
Special Tools Required
Adjustable Bearing Puller, 25пјЌ40 mm 07736-A01000B
Driver Handle, 15 x 135L 07749-0010000
Bearing Driver Attachment, 62 x 68 mm 07746-0010500
Bearing Driver Attachme ...