Honda Fit: Gearshift Mechanism Replacement (M/T)
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves.
See also:
Inboard Joint Side
Remove the boot bands. Be careful not to damage the boot.
If the boot band is welded type (A), cut the boot band.
If the boot band is a double loop type (B), lift up the ban ...
Ignition Switch
The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and
START (III).
LOCK (0) - You can insert or remove the key only in this position.
To turn the key, push it in slightly ...
Steering Column Cover Removal/Installation
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the column cover.
Do not pry on the cover surface with any tools.
Release the tilt/telescope leve ...
Categories
