Honda Fit: Shift Lever Housing Replacement (M/T)
NOTE: Take care not to scratch the center console, dashboard, and related parts.
-
Remove the center console.
-
Remove the harness clamps (A).
-
Remove the lock pin (A), the washer (B), the shift cable clip (C), and the shift cables (D) from the shift lever housing assembly (E).
-
Remove the four bolts (A). Disconnect the shift cables (B) from the shift lever, then remove the shift lever housing (C).
-
Install the shift lever housing in the reverse order of removal.
See also:
Driver's Seat Position Sensor Operation Check
Check the driver's seat position sensor after the driver's seat position
sensor replacement.
Make sure the driver's seat is all the way forward position.
Make sure the ...
Identification Numbers
Your vehicle has several identifying numbers in various places.
The vehicle identification number (VIN) is the 17-digit number your dealer uses
to register your vehicle for warranty purposes. It is ...
Auxiliary Input Jack
U.S. Sport and all Canadian models
The auxiliary input jack is underneath the accessory power socket in the center
pocket. The system will accept auxiliary input from standard audio accessories.
...
Categories
