Honda Fit: Manual Transmission Disassembly (M/T)

See also:

Change Lever Clearance Inspection (M/T)
Measure the clearance between the change lever (A) and the select lever (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2. ...

Alternator Brush Inspection
Measure the length of both brushes (A) with a vernier caliper: If either brush is shorter than the service limit, replace the brushes, go to step 20. If brush length ...

Changing Your Destination
There are four methods you can use to specify a new destination during route guidance. ►Say “Find Nearest…”  Searches for the nearest place/landmark on the map screen (e.g., “ ...