Honda Fit: Pilot Bearing Inspection
-
Inspect the crankshaft pilot bearing for wear and damage.
-
Inspect the inside surface of the crankshaft pilot bearing with your finger. If the crankshaft pilot bearing is not smooth, replace it; go to step 22.
See also:
Steering Rack Guide Removal/Installation
NOTE: During removal/installation, do not allow dust, dirt, or other foreign
materials to enter the steering gearbox.
Remove the steering gearbox.
Loosen the locknut (A), then ...
Throttle Body Cleaning
caution
Do not insert your fingers into the installed throttle body when you
turn the ignition switch to ON (II) or while the ignition switch is in
ON (II). If you d ...
Immobilizer System Description
The vehicle is equipped with a Type VII immobilizer system that disables the
vehicle unless a programmed ignition key is used.
This system consists of a transponder combined with a keyless transmit ...
Categories
